Starlight Luminizer Serum ⋅ Gattefossé

In a few words

This O/W emulsion has a light texture, characteristic of its emulsifier Emulium® Dermolea MB. This formula can be applied on the face, breast, arms, or legs for a shimmering effect that varies according to the quantity applied. With EnergiNius® inside, this serum is a real vitality booster. It revives tonicity and elasticity both of the face and the body.

Key points

Shimmering effect
Light texture
Caring & Revitalizing

Upon application

Formula

Phase	Name	INCI	Supplier	%
A1	DEMINERALIZED WATER	WATER	_	72.4
A1	STRUCTURE® XL	HYDROXYPROPYL STARCH PHOSPHATE	NOURYON	3.0
A2	PROPANEDIOL	PROPANEDIOL	_	5.0
	BUTYLENE GLYCOL	BUTYLENE GLYCOL	_	5.0
	SATIAXANE™ VPC 911	XANTHAN GUM	CARGILL	0.2
B	EMULIUM® DERMOLEA MB	POLYGLYCERYL-6 DISTEARATE, CANDELILLA/JOJOBA/RICE BRAN POLYGLYCERYL-3 ESTERS	GATTEFOSSE	2.0
	LABRAFAC™ CC MB	CAPRYLIC/CAPRIC TRIGLYCERIDE	GATTEFOSSE	4.0
	ACTICIRE® MB	JOJOBA ESTERS, HELIANTHUS ANNUUS (SUNFLOWER) SEED WAX, ACACIA DECURRENS FLOWER WAX, POLYGLYCERIN-3	GATTEFOSSE	2.0
C	EUXYL™ K 712	WATER, SODIUM BENZOATE, POTASSIUM SORBATE	SCHULKE & MAYR	1.0
	ENERGINIUS®	FRUCTOSE, GLYCERIN, WATER, WITHANIA SOMNIFERA ROOT EXTRACT	GATTEFOSSE	1.0
D	PERFUME INCROYABLE ITM528727	PARFUM	DOMAINE D’ARGEVILLE	0.2
E	CITRIC ACID (10% SOL.)	WATER, CITRIC ACID	_	0.5
F	SUNSHINE® SUPER GLITTER GOLD	SYNTHETIC FLUORPHLOGOPITE, TITANIUM DIOXIDE, IRON OXIDES	SUN CHEMICAL	0.8
	COVAPEARL® ANTIQUE SILVER 239	MICA, TITANIUM DIOXIDE, IRON OXIDES	SENSIENT	1.0
	COLORONA® BRONZE FINE	MICA, IRON OXIDES	MERCK	0.5
	SUNSHINE® SUPER GLITTER BRONZE	SYNTHETIC FLUORPHLOGOPITE, IRON OXIDES	SUN CHEMICAL	0.4
	MIRAGE® SPARKLING CHAMPAGNE	CALCIUM SODIUM BOROSILICATE, IRON OXIDES, TIN OXIDE	ECKART	1.0
				100.00

Operating instruction

Heat the water of phase A1 at 70°C and disperse Structure® XL for 15 minutes under high shear.
Add premix A2 into A1 under moderate shear for 10 minutes and check that everything is homogeneous. Maintain the temperature at 70°C.
Heat the oil phase B at 70°C. Check that everything is homogeneous.
Proceed with the emulsion of phase B into phase A (A1+A2) at 70°C, under moderate shear, and then increase to high shear (2500 rpm) for 10 minutes.
Cool down under moderate shear and below 35°C add the phase C, D and E one by one.
Add finally the pearls of phase F and mix slowly for 10 minutes.
Finish to cool down until reaching 25°C. Check the pH and adjust if necessary.