In a few words
This night cream has been specially formulated to take care of skin exposed to the sun during the day. Its bouncy texture penetrates quickly and leaves a soft and comfortable film thanks to Emulium® Dolcea MB, while Solastemis™ boosts the endogenous DNA repair system and reduces the effects of photoaging on the skin.
Key points
- Photo-aging protection
- Bouncy texture
- Very soft afterfeel
Upon application
Formula
Phase | Name | INCI | Supplier | % |
---|---|---|---|---|
A | EMULIUM® DOLCEA MB | CETEARYL ALCOHOL, GLYCERYL STEARATE, JOJOBA ESTERS, HELIANTHUS ANNUUS (SUNFLOWER) SEED WAX, SODIUM STEAROYL GLUTAMATE, WATER, POLYGLYCERIN-3 | Gattefossé | 3.0 |
BENTONE GEL EUG V | OCTYLDODECANOL, DISTEARDIMONIUM HECTORITE, PROPYLENE CARBONATE | Elementis | 5.0 | |
B1 | DEMINERALIZED WATER | WATER | - | 70.5 |
NATROSOL PLUS 330 CS | CETYL HYDROXYETHYLCELLULOSE | Ashland | 1.0 | |
B2 | SATIAXANE VPC 911 | XANTHAN GUM | Cargill | 0.3 |
C | LEXFEEL WOW-A-DT | C13-16 ISOPARAFFIN, HEPTYL UNDECYLENATE | Inolex | 15.0 |
D | EUXYL K 712 | WATER, SODIUM BENZOATE, POTASSIUM SORBATE | Schulke & Mayr | 1.5 |
SOLASTEMIS™ | FRUCTOSE, WATER, GLYCERIN, SECHIUM EDULE FRUIT EXTRACT | Gattefossé | 2.0 | |
PERFUME PETILLANTE 0603557 | PARFUM | Expressions Parfumées | 0.2 | |
E | CITRIC ACID (10% SOL.) | WATER, CITRIC ACID | - | 1.5 |
100.0 |
Operating instruction
- Disperse Natrosol Plus 330 CS into water of B1 heated to 60°C, mix for about 10 minutes.
- Add Satiaxane VPC 911 and mix for about 10 minutes.
- Heat B1+B2 at 55°C.
- Prepare A and heat to 65°C.
- Under mixing (defloculator 3000 rpm), add A to B1+B2 and mix for 10 minutes.
- Add C below 50°C and mix for 5 minutes under high shear.
- Cool under mixing until 35°C, then add D and E.
Specifications
- Aspect: Soft white bouncy cream
- pH = 5.4 ± 0.5
- Viscosity Brookfield RV (spindle A, speed 5): approx. 26 000 mPa.s after 24h
- 99% natural origin (ISO 16128)