Full Protection Foundation ⋅ Gattefossé

In a few words

Protect your skin from external aggressions with this W/O foundation. Formulated with Emulium® Illustro, its fluid texture unifies the complexion and gives a natural glow. With a SPF25, it forms a shield against UV and screen artificial light thanks to EnergiNius®.

Key points

Fluid texture
Soft afterfeel
Protective shield

Formule

Phase	Name	INCI	Supplier	%
A1	EMULIUM® ILLUSTRO	POLYGLYCERYL-6 POLYHYDROXYSTEARATE, POLYGLYCERYL-6 POLYRICINOLEATE, POLYGLYCERIN-6	Gattefossé	3,500
	HALLBRITE EZ-FLO TDX	TITANIUM DIOXIDE, BUTYLOCTYL SALICYLATE, DIMETHICONE CROSSPOLYMER, SILICA, TRICETEARETH-4 PHOSPHATE	Hallstar	12,000
	PARSOL MCX	ETHYLHEXYL METHOXYCINNAMATE	DSM	3,000
	PARSOL 340	OCTOCRYLENE	DSM	2,000
	PRESERVATIVE	PRESERVATIVE	-	0,700
	BENTONE GEL EUG V	OCTYLDODECANOL, DISTEARDIMONIUM HECTORITE, PROPYLENE CARBONATE	Elementis	3,500
	KF-96A-6CS	DIMETHICONE	Shin-Etsu	4,000
A2	DPPG CG	PROPYLENE GLYCOL DIPELARGONATE	Gattefossé	2,500
	ZINCLEAR-IM®55L7	ZINC OXIDE, NEOPENTYL GLYCOL DIHEPTANOATE, GLYCERYL ISOSTEARATE, POLYHYDROXYSTEARIC ACID, CETYL PEG / PPG-10/1 DIMETHI	Antaria	9,000
	ZANO M PLUS	ZINC OXIDE, TRIETHOXYCAPRYLYLSILANE	Everzinc Belgium	7,000
A3	DPPG CG	PROPYLENE GLYCOL DIPELARGONATE	Gattefossé	3,500
	UNIPURE WHITE LC 987 AS-EM	TITANIUM DIOXIDE, TRIETHOXYCAPRYLYLSILANE	Sensient	4,000
	UNIPURE YELLOW 182 AS-EM	IRON OXIDES, TRIETHOXYCAPRYLYLSILANE	Sensient	0,700
	UNIPURE RED LC 381 AS-EM	IRON OXIDES, TRIETHOXYCAPRYLYLSILANE	Sensient	0,125
	UNIPURE BLACK LC 989 AS-EM	IRON OXIDES, TRIETHOXYCAPRYLYLSILANE	Sensient	0,065
B	DEMINERALIZED WATER	WATER	-	35,510
	ENERGINIUS®	FRUCTOSE, GLYCERIN, WATER, WITHANIA SOMNIFERA ROOT EXTRACT	Gattefossé	1,000
	GATULINE® RENEW	BUTYLENE GLYCOL, WATER, CRYPTOMERIA JAPONICA BUD EXTRACT	Gattefossé	1,000
	MAGNESIUM SULFATE (99%)	MAGNESIUM SULFATE	Merck	0,700
	SODIUM CHLORIDE, CODEX	SODIUM CHLORIDE	-	0,700
C	ARLAMOL HD	ISOHEXADECANE	Croda	3,000
	SOFTOUCH CC6058	BORON NITRIDE	Momentive	2,000
	COVABEAD PMMA 2 MUSI	METHYL METHACRYLATE CROSSPOLYMER, SILICA	Sensient	0,500
				100,000

Operating instruction

Heat A1 up to 60°C and homogenize under stirring (1000 rpm) for 5 min.
Disperse A2 under stirring and then homogenize with ultra turrax (10 000 rpm) for 2 min, then add to A1.
Prepare A3: heat DPPG at 60°C, add slowly pigments under stirring and stir for 10 min. Then use a three roll mill to smooth the dispersion.
Add A3 to A1+ A2 and homogenize with rotor stator (2500 rpm) for 5 min.
Heat B up to 50°C.
Add B (50°C) to A (60°C) under mixing and homogenize with rotor stator (3000 rpm) for 5 min.
Prepare C: premix and homogenize with ultra turrax (10 000 rpm) for 2 min.
Cool A+B to 40°C and add C. Then homogenize with rotor stator (3000 rpm) for 2 min.
Cool under moderate mixing.