Slide N’Foam ⋅ Gattefossé

In a few words

Adopt a new gesture thanks to this face cleanser with a solid but melting texture! Apply the product directly onto dry skin, then rub the skin with wet hands to create foam and clean the skin. Thus, the product is not damaged by water and is gentler for the skin as only the right amount is applied.

Key points

Solid format
New gesture
Gentle cleanser

Upon application

Formula

Phase	Name	INCI	Supplier	%
A1	JORDAPON® SCI Powder	SODIUM COCOYL ISETHIONATE	BASF	30.0
	DEHYTON AB 30	WATER, COCO-BETAINE	BASF	10.0
	ORIGINAL EXTRACT™ ORANGE BIO	CITRUS AURANTIUM DULCIS (ORANGE) FRUIT WATER	Gattefossé	10.0
A2	RICE PO4 NATURAL	DISTARCH PHOSPHATE	IMCD	5.0
B	LIPOCIRE™ A SG	C10-18 TRIGLYCERIDES	Gattefossé	15.0
	KAHLWAX 2442L	CARNAUBA (CORPENICIA CERIFERA) WAX	Kahl	6.0
	KAHLWAX 2442L	SIMMONDSIA CHINENSIS (JOJOBA) SEED OIL	-	18.3
	ACTICIRE® MB	JOJOBA ESTERS, HELIANTHUS ANNUUS (SUNFLOWER) SEED WAX, POLYGLYCERIN-3, ACACIA DECURRENS FLOWER WAX	Gattefossé	5.0
	PRESERVATIVE	PRESERVATIVE	-	0.7
				100.0

Operating instruction

Heat A1 at 85°C and mix with a spatula until obtaining a supple white texture.
Add A2 to A1 and mix with the spatula, then mix under deflocculator for 2 min until homogenization.
Heat A1+A2 at 85°C.
Heat B at 85°C for at least 15 min.
Under deflocculator , add B to A1+A2 (2000 rpm) for 5 min, until obtaining a supple yellowish paste.
Cool under deflocculator until 65°C.
Put the paste in the moulds with the help of a piping bag (about 66°C).
Let cool in the moulds (at least 1h) and put in the refrigerator (2h) to enable unmoulding.