In a few words
This fluid foundation perfectly melts into the skin to blur imperfections, even out skin tone and bring light. Emulium® Illustro provides a soft and silky texture, while Acticire® brings comfort to the skin. Emulium® Illustro is also used to wet pigments and improve their dispersion into the formula.
Key points
- Fluid foundation
- Soft touch
- Even complexion
Formula
| Phase | Name | INCI | Supplier | % |
|---|---|---|---|---|
| A1 | EMULIUM® ILLUSTRO | POLYGLYCERYL-6 POLYHYDROXYSTEARATE, POLYGLYCERYL-6 POLYRICINOLEATE, POLYGLYCERIN-6 | Gattefossé | 2.900 |
| LEXFEEL N5 | DIHEPTYL SUCCINATE, CAPRYLOYL GLYCERIN/SEBACIC ACID COPOLYMER | Inolex | 9.500 | |
| LEXFILM® SUN NATURAL | CAPRYLOYL GLYCERIN/SEBACIC ACID COPOLYMER | Inolex | 2.500 | |
| ACTICIRE® MB | JOJOBA ESTERS, HELIANTHUS ANNUUS (SUNFLOWER) SEED WAX, ACACIA DECURRENS FLOWER WAX, POLYGLYCERIN-3 | Gattefossé | 2.000 | |
| PRESERVATIVE | PRESERVATIVE | - | 0.700 | |
| BENTONE GEL NGD V | NEOPENTYL GLYCOL DIHEPTANOATE, DISTEARDIMONIUM HECTORITE, PROPYLENE CARBONATE | Elementis | 3.000 | |
| LEXFEEL NATURAL | HEPTYL UNDECYLENATE | Inolex | 1.500 | |
| A2 | LEXFEEL NATURAL | HEPTYL UNDECYLENATE | Inolex | 4.000 |
| NAI-TAO-77891 | TITANIUM DIOXIDE, DISODIUM STEAROYL GLUTAMATE, ALUMINUM HYDROXIDE | Miyoshi | 10.530 | |
| NAI-C339001-10 | IRON OXIDES, DISODIUM STEAROYL GLUTAMATE, ALUMINUM HYDROXIDE | Miyoshi | 2.200 | |
| NAI-C338001-10 | IRON OXIDES, DISODIUM STEAROYL GLUTAMATE, ALUMINUM HYDROXIDE | Miyoshi | 0.410 | |
| NAI-C337001-10 | IRON OXIDES, DISODIUM STEAROYL GLUTAMATE, ALUMINUM HYDROXIDE | Miyoshi | 0.158 | |
| RONAFLAIR® B-50 | BISMUTH OXYCHLORIDE | Merck | 2.000 | |
| EMULIUM® ILLUSTRO | POLYGLYCERYL-6 POLYHYDROXYSTEARATE, POLYGLYCERYL-6 POLYRICINOLEATE, POLYGLYCERIN-6 | Gattefossé | 0.100 | |
| B | DEMINERALIZED WATER | WATER | - | 42.352 |
| MAGNESIUM SULFATE (99%) | MAGNESIUM SULFATE | Merck | 0.750 | |
| SODIUM CHLORIDE, CODEX | SODIUM CHLORIDE | - | 0.750 | |
| C | CETIOL® ULTIMATE | UNDECANE, TRIDECANE | BASF | 3.000 |
| LEXFEEL WOW-A-DT | HEPTYL UNDECYLENATE, C13-15 ALKANE | Inolex | 6.000 | |
| SILICA BEADS SB-300 | SILICA | Miyoshi | 1.500 | |
| SILICA BEADS SBNP-810 | SILICA | Miyoshi | 2.250 | |
| SOFTOUCH CC6058 | BORON NITRIDE | Momentive | 1.750 | |
| D | PERFUME PRECIEUSE NEW 1510985 | PARFUM | Expressions Parfumées | 0.150 |
Operating instruction
- Heat A1 to 50°C and homogenize under stirring (1000 rpm) for 5 min.
- Prepare A2: heat Lexfeel Natural and Emulium® Illustro to 60°C and add slowly pigments under stirring, then stir for 10 min. Then use a three roll mill to smooth the dispersion. Add to A1 and homogenize with ultra-turrax for 2 min (10 000 rpm).
- Prepare B: heat water to 50°C and add salts under stirring. Mix until complete solubilization.
- Add B (50°C) to A (50°C) under mixing and homogenize for 10 min at 1500 rpm.
- Cool to 40°C under moderate mixing.
- Prepare C and homogenize with ultra-turrax at 10 000 rpm for 2 min.
- Add C under mixing.
- Then cool under moderate mixing to 27°C and add D, mix for a few minutes.
Specifications
- Aspect: Tinted fluid emulsion
- Viscosity Brookfield RV (spindle A, speed 5): approx. 6000 mPa.s after 24h
Related products
Emulium® Illustro
Pigment empowered
INCI Polyglyceryl-6 Polyhydroxystearate (and) Polyglyceryl-6 Polyricinoleate (and) Polyglycerin-6 China NMPA notified
Emulium® Illustro is a W/O natural origin emulsifier that is highly compatible with pigments and UV filters.
Acticire® MB
Active waxes
INCI Jojoba Esters (and) Helianthus Annuus (Sunflower) Seed Wax (and) Acacia Decurrens Flower Wax (and) Polyglycerin-3 China NMPA notified
Acticire® MB is a 100% natural origin texturizing agent based on a complex of 3 functionalized waxes.
