In a few words

This foundation, available in three shades, is a real technical achievement since it allows to obtain a luminous and unified complexion, with a natural composition. Thanks to Emulium® Illustro, this W/O foundation has a soft and comfortable texture that spreads easily to the skin, without marking wrinkles and fine lines.

Key points

  • Natural foundation 
  • Glowing effect
  • Velvety touch
  • baume

Formula

PhaseNameINCISupplier%
ACETIOL® C5COCO-CAPRYLATEBASF9.00
MAGNESIUM STEARATEMAGNESIUM STEARATESigma Chimie2.00
BEMULIUM® ILLUSTROPOLYGLYCERYL-6 POLYHYDROXYSTEARATE, POLYGLYCERYL-6 POLYRICINOLEATE, POLYGLYCERIN-6Gattefosse5.00
CUNIPURE WHITE LC 981 HLCTITANIUM DIOXIDE, HYDROGENATED LECITHINSensient10.77
UNIPURE YELLOW LC 182 HLCIRON OXIDES, HYDROGENATED LECITHINSensient2.10
UNIPURE RED LC 381 HLCIRON OXIDES, HYDROGENATED LECITHINSensient0.58
UNIPURE BLACK LC 989 HLCIRON OXIDES, HYDROGENATED LECITHINSensient0.25
CETIOL® OEDICAPRYLYL ETHERBASF4.44
DNEOSSANCE HEMISQUALANEC13-15 ALKANESafic Alcan5.00
LIPEX SHEA LIGHTSHEA BUTTER ETHYL ESTERSLipo5.00
AEROSIL 200SILICAEvonik0.75
EDEMINERALIZED WATERWATER-51.41
MAGNESIUM SULFATE (99%)MAGNESIUM SULFATEMerck1.00
SODIUM CHLORIDE, CODEXSODIUM CHLORIDE-1.00
FCITRIC ACID (10% SOL.)WATER, CITRIC ACID-0.40
GPRESERVATIVEPRESERVATIVESchulke & Mayr1.00
HPERFUME SILLAGE NEW 1502839PARFUMExpressions Parfumees0.30
    100.00

Operating instruction

  • COLD PROCESS (except preparation of A) 
  • Prepare A in advance: heat A to 93-95°C and mix at the same time. 
  • Prepare C and pass it through a three roll mill 3 times. 
  • Prepare D: add Aerosil 200 to the ingredients of D, mix until homogenization. 
  • Add B to A. 
  • Add C to A+B. 
  • Add D to A+B+C. 
  • Prepare E, then under rapid mixing (rotor stator 3000 rpm) add E to A+B+C+D. 
  • Continue rapid mixing for about 10 min. 
  • If necessary, cool under mixing and add the others components.

Specifications

  • Aspect: Light brown bright cream 
  • Due to the preservative system, pH of the aqueous phase is adjusted under 5.5
  • Viscosity Brookfield RV (spindle B, speed 5): approx. 13 400 mPa.s after 24h

Related products