In a few words
This SPF30 sunscreen doesn't look to be! Thanks to Emulium® Dolcea MB, the texture is soft and comfortable and leaves a very smooth, non-greasy and non-sticky afterfeel. It can be used for daily care or for the beach.
Key points
- Hybrid product
- Creamy texture
- Very soft afterfeel
Upon application
Formula
Phase | Name | INCI | Supplier | % |
---|---|---|---|---|
A | DEMINERALIZED WATER | WATER | - | 47,55 |
KELCO-CARE™ DIUTAN GUM | SPHINGOMONAS FERMENT EXTRACT | Lubrizol | 0,15 | |
B | EMULIUM® DOLCEA MB | GLYCERYL STEARATES, JOJOBA ESTERS, CETYL ALCOHOL, STEARYL ALCOHOL, HELIANTHUS ANNUUS (SUNFLOWER) SEED WAX, SODIUM STEAROYL GLUTAMATE, WATER, POLYGLYCERIN-3 |
Gattefossé | 5,00 |
COMPRITOL® 888 CG MB | GLYCERYL BEHENATE | Gattefossé | 5,00 | |
UVINUL T 150 | ETHYLHEXYL TRIAZONE | BASF | 3,00 | |
UVINUL A PLUS | DIETHYLAMINO HYDROXYBENZOYL HEXYL BENZOATE | BASF | 5,00 | |
TINOSORB S | BIS-ETHYLHEXYLOXYPHENOL METHOXYPHENYL TRIAZINE | BASF | 2,00 | |
PARSOL EHS | ETHYLHEXYL SALICYLATE | DSM | 5,00 | |
ANTARON™ ECO GEL | DIISOPROPYL ADIPATE, ETHYLCELLULOSE | Ashland | 1,50 | |
CETIOL® B | DIBUTYL ADIPATE | BASF | 6,00 | |
SCHERCEMOL DIS ESTER | DIISOPROPYL SEBACATE | Lubrizol | 9,00 | |
HALLBRITE BHB | BUTYL OCTYL SALYCILATE | Hallstar | 2,50 | |
PRESERVATIVE | PRESERVATIVE | - | 0,70 | |
SCHERCEMOL PDD | DIISOSTEAROYL POLYGLYCERYL-3 DIMER DILINOLEATE | Lubrizol | 2,00 | |
C | SUNHANCER™ ECO SPF BOOSTER | COPERNICIA CERIFERA (CARNAUBA) WAX, ORYZA SATIVA (RICE) BRAN WAX | Lubrizol | 3,00 |
BUTYLENE GLYCOL | BUTYLENE GLYCOL | - | 4,00 | |
D | SOLASTEMIS™ | FRUCTOSE, WATER, GLYCERIN, SECHIUM EDULE FRUIT EXTRACT | Gattefossé | 2,00 |
CITRIC ACID (30% SOL.) | WATER, CITRIC ACID | - | 0,10 | |
100,00 |
Operating instruction
- Heat water to 75°C, then add slowly Kelco-Care™ Diutan Gum under stirring and let the gel swell for 5 min.
- Heat B to 82°C under stirring until complete solubilisation of UV filters and polymer.
- Add slowly B to A at 75°C under rapid mixing (2000 rpm) for 15 min.
- Cool to 45°C under moderate mixing (1000 rpm).
- Prepare C (thick paste) and then add to A+B under rapid mixing. Homogenize with ultra turrax for 2 min to make sure to properly disperse Sunhancer™ Eco SPF Booster.
- Cool to 30°C under moderate mixing and add D then E.
- Complete cooling.
Specifications
- Aspect:
Glossy and slightly yellow cream - pH = 6.3 ± 0.5
- Viscosity Brookfield RV (spindle A, speed 5):
approx. 35 000 mPa.s after 24h
- Conform to Australian, EU, Japan, UK,
MERCOSUR, and China regulations
SPF in vivo (ISO 24444:2019): 38 (5 subjects)
UVA in vitro (ISO 24443:2021): 14
Water resistance (ISO 16217:2020 and ISO 18861:2020): 54.7%
Critical wavelength (ISO 24443:2021): 373nm