In a few words
This sunscreen is the best skin warm-up for outdoor athletes. With a high SPF protection, it protects the skin from the sun during activities. It is the best solution to work out in the sun thanks to its sweatproof properties brought by Emulium® 22. This emulsifier provides a high and comfortable feeling of protection on the skin and high water-resistance to the cream. Formulated with inorganic and organic filters and free from suspected endocrinian disruptors, this sun protection is perfect for sensitive skin.
Key points
- Move it
- Elegant paradox
- No endocrinian disruptors
Formule
Phase | Name | INCI | Supplier | % |
---|---|---|---|---|
A1 | DEMINERALIZED WATER | WATER | - | 38.50 |
CARBOPOL® AQUA SF-1 OS POLYMER | ACRYLATES COPOLYMER | Lubrizol | 2.00 | |
A2 | BUTYLENE GLYCOL | BUTYLENE GLYCOL | - | 4.00 |
SATIAXANE™ CX91 | XANTHAN GUM | Cargill | 0.30 | |
A3 | AMPHISOL® K | POTASSIUM CETYL PHOSPHATE | DSM | 0.50 |
DEMINERALIZED WATER | WATER | - | 6.00 | |
B1 | EMULIUM® 22 MB | TRIBEHENIN PEG-20 ESTERS | Gattefossé | 4.00 |
TINOGARD® TL | BENZOTRIAZOLYL DODECYL P-CRESOL | BASF | 0.50 | |
UVINUL® A PLUS | DIETHYLAMINO HYDROXYBENZOYL HEXYL BENZOATE | BASF | 7.00 | |
PARSOL® EHS | ETHYLHEXYL SALICYLATE | DSM | 5.00 | |
TINOSORB® S | BIS-ETHYLHEXYLOXYPHENOL METHOXYPHENYL TRIAZINE | BASF | 3.50 | |
UVINUL® T 150 | ETHYLHEXYL TRIAZONE | BASF | 5.00 | |
HALLBRITE® BHB | BUTYL OCTYL SALYCILATE | Hallstar | 3.50 | |
SCHERCEMOL™ DIS ESTER | DIISOPROPYL SEBACATE | Lubrizol | 5.00 | |
DPPG CG | PROPYLENE GLYCOL DIPELARGONATE | Gattefossé | 3.00 | |
C12-15 ALKYL BENZOATE | C12-15 ALKYL BENZOATE | Evonik | 5.00 | |
B2 | PARSOL® TX | TITANIUM DIOXIDE, SILICA, DIMETHICONE | DSM | 6.00 |
C | PRESERVATIVE | PRESERVATIVE | - | 0.70 |
100.00 |
Operating instruction
- Prepare A1.
- Premix A2 and add to A1. Mix until the Xanthan Gum swells.
- Heat A1+A2 up to 78°C.
- Prepare A3 and heat up to 78°C to perfectly solubilize Amphisol® K; then add to A1+A2.
- Add A4 and mix for a few minutes until complete solubilization of EDTA.
- Add A5.
- Prepare B1 and heat up to 81°C under mixing until perfect solubilization of UV filters.
- Add B2 to B1 and homogenize with Ultra-Turrax for 2 minutes.
- Add slowly B to A at 78°C and mix for 10-15 minutes at 1500 rpm.
- Cool to 35°C under mixing (about 800 rpm) ad add C.
- Complete cooling to 25-27°C under mixing.
Specifications
- Aspect: Light yellow cream
- pH = 6.2 ± 0.3
- Viscosity Brookfield RV (spindle B, speed 5): approx. 30 000 mPa.s after 24h
- SPF in vivo (ISO 24 444): 65.8 (5 subjects)
- UVA in vitro (ISO 24 443): 15.97
- Photostability = 91%
- Critical wavelength (ISO 24 443) = 374 nm
- Water-Resistance in vivo (Colipa 2005): 75.2% (5 subjects)