Zero Shine Cream

2590-1.08

In a few words

No more shine thanks to this soft but formidable cream that mattifies the skin without drying it out. Formulated with Plurol® Stearique MB which provides a dry and powdery feel, its creamy texture penetrates quickly and leaves a comfortable and matte film. Cytobiol™ Iris A² helps to fight against shine but also to reduce imperfections.

Key points

  • Powdery touch 
  • Comfortable 
  • Mattified skin

Upon application

Formule

PhaseNameINCISupplier%
APLUROL® STEARIQUE MBPOLYGLYCERYL-6 DISTEARATEGattefossé4.00
CETYL ALCOHOLCETYL ALCOHOL-1.50
JOJOBA OILSIMMONDSIA CHINENSIS (JOJOBA) SEED OIL-5.00
CETIOL® C5COCO-CAPRYLATEBASF12.00
BDEMINERALIZED WATERWATER-1.70
GLYCERINGLYCERINBASF0.30
CAVICEL® PC 591MICROCRYSTALLINE CELLULOSE, CELLULOSE GUMFMC0.75
DVANATURALBENTONITER.T. Vanderbilt0.75
EORIGINAL EXTRACT™ LEMON BIOCITRUS LIMON (LEMON) FRUIT WATERGattefossé5.00
FDEMINERALIZED WATERWATER-1.70
EUMULGIN® SGSODIUM STEAROYL GLUTAMATEBASF0.30
GSILICA BEADS SB-700SILICAMiyoshi3.00
HCYTOBIOL™ IRIS A²PROPANEDIOL, WATER, ALCOHOL, IRIS FLORENTINA ROOT EXTRACT, ZINC SULFATE, RETINYL PALMITATEGattefossé5.00
PERFUME TAXI SUNRISE RS 15014PARFUMTechnico-Flor0.30
ICITRIC ACID (10% SOL.)WATER, CITRIC ACID-0.80
JEUXYL K 712WATER, SODIUM BENZOATE, POTASSIUM SORBATESchulke & Mayr1.00
    100.00

Operating instruction

  • Prepare phase A and heat to 75°C. 
  • Disperse C into B heated to 75°C under mixing, mix for about 10 min under high shear. 
  • Add D to B+C and mix for about 10 min under high shear. 
  • Prepare F: add Eumulgin® SG to water under slow mixing until complete dissolution (heat if necessary). 
  • Add E then F to B+C+D and heat to 75°C. 
  • Under rapid mixing (rotor stator 3000 rpm), add A to B+C+D+E+F and maintain rapid mixing for about 10 min. 
  • Cool to 35°C then add G, H, I and J. 
  • Complete cooling.

Specifications

  • Aspect: White cream 
  • pH = 5.6 ± 0.5
  • Viscosity Brookfield RV (spindle C, speed 5): approx. 115 000 mPa.s after 24h

Related products