In a few words
Refresh and protect your skin with this sprayable suncare lotion. Thanks to Emulfree® CBG MB and its bi-gel technology, the formula is very fluid and refreshing during application and brings comfort without any greasy nor tacky afterfeel.
Key points
- Refreshing effect
- Light texture
- Sprayable
Upon application
Formule
| Phase | Name | INCI | Supplier | % |
|---|---|---|---|---|
| A1 | DEMINERALIZED WATER | WATER | - | 43.05 |
| BUTYLENE GLYCOL | BUTYLENE GLYCOL | - | 3.00 | |
| SATIAXANE VPC 911 | XANTHAN GUM | Cargill | 0.10 | |
| A2 | CARBOPOL® AQUA SF-1 OS POLYMER | WATER, ACRYLATES COPOLYMER | Lubrizol | 2.00 |
| A3 | SODIUM HYDROXIDE (10 % SOL.) | WATER, SODIUM HYDROXIDE | - | 0.25 |
| B | EMULFREE® CBG MB | ISOSTEARYL ALCOHOL, BUTYLENE GLYCOL COCOATE, ETHYLCELLULOSE | Gattefossé | 5.00 |
| ACTICIRE® MB | JOJOBA ESTERS, HELIANTHUS ANNUUS (SUNFLOWER) SEED WAX, POLYGLYCERIN-3, ACACIA DECURRENS FLOWER WAX | Gattefossé | 1.00 | |
| UVINUL T 150 | ETHYLHEXYL TRIAZONE | BASF | 2.00 | |
| UVINUL A PLUS | DIETHYLAMINO HYDROXYBENZOYL HEXYL BENZOATE | BASF | 5.00 | |
| TINOSORB S | BIS-ETHYLHEXYLOXYPHENOL METHOXYPHENYL TRIAZINE | BASF | 2.00 | |
| PARSOL EHS | ETHYLHEXYL SALICYLATE | DSM | 5.00 | |
| C12-15 ALKYL BENZOATE (68233) | C12-15 ALKYL BENZOATE | - | 6.00 | |
| SCHERCEMOL DIS ESTER | DIISOPROPYL SEBACATE | Lubrizol | 4.00 | |
| DPPG CG | PROPYLENE GLYCOL DIPELARGONATE | Gattefossé | 2.00 | |
| HALLBRITE BHB | BUTYL OCTYL SALYCILATE | Hallstar | 2.50 | |
| PRESERVATIVE | PRESERVATIVE | - | 0.70 | |
| SCHERCEMOL PDD | DIISOSTEAROYL POLYGLYCERYL-3 DIMER DILINOLEATE | Lubrizol | 2.00 | |
| C | DEMINERALIZED WATER | WATER | - | 3.00 |
| SODIUM HYDROXIDE (10 % SOL.) | WATER, SODIUM HYDROXIDE | - | 3.40 | |
| PARSOL HS | PHENYLBENZIMIDAZOLE SULFONIC ACID | DSM | 2.00 | |
| D | CORN PO4 PH B 9042 | DISTARCH PHOSPHATE | Agrana | 2.00 |
| DEMINERALIZED WATER | WATER | - | 4.00 | |
| 100.00 |
Operating instruction
- Heat water at 75°C, add slowly under stirring premix of xanthan gum and butylene glycol, then stirr for 5 min.
- Add A2 and A3 to A and mix for 5 min.
- Prepare B and heat at 82°C under stirring until complete solubilization of UV filters.
- Add slowly B (75°C) to A (75°C) under rapid mixing (2000 rpm) for 15 min.
- Cool to 45°C under moderate mixing (1000 rpm).
- Premix C and add to the emulsion under rapid mixing.
- Cool to 30°C under moderate mixing, premix D and add to the emulsion. If Corn PO4 is added at a too high temperature, it swells and increases emulsion viscosity.
- Complete cooling to 25°C.
Specifications
- Aspect: Glossy and slightly yellow fluid emulsion
- pH = 7.3 ± 0.5
- Viscosity Brookfield RV (spindle A, speed 5): approx. 5 000 mPa.s after 24h
- Conform to Australian, EU, Japan, UK and China regulations
- SPF in vivo (ISO 24444:2019): 31 (5 subjects)
- UVA in vitro (ISO 24443:2021): 13.1
- Photostability: 89%
- Critical wavelength (ISO 24443:2021): 373nm
Related products
Acticire® MB
Active waxes
INCI Jojoba Esters (and) Helianthus Annuus (Sunflower) Seed Wax (and) Acacia Decurrens Flower Wax (and) Polyglycerin-3 China NMPA notified
Acticire® MB is a 100% natural origin texturizing agent based on a complex of 3 functionalized waxes.
Emulfree® CBG MB
Cooling sensation
INCI Isostearyl Alcohol (and) Butylene Glycol Cocoate (and) Ethylcellulose China NMPA notified
Emulfree® CBG MB is a unique ingredient that imparts a refreshing, long-lasting sensation of coolness upon application.
DPPG CG
Improving skin feel and protection
INCI Propylene Glycol Dipelargonate China NMPA notified
DPPG CG provides a dry skin feel thanks to its short carbon chain.
Associated content
Acticire® MB
Acticire® MB est un texturant basé sur un complexe de 3 cires fonctionnalisées.
Emulfree® CBG MB
Emulfree® CBG MB est un ingrédient unique qui procure une sensation de fraîcheur…
