In a few words
This fluid texture is ideal for thirsty skin. Its high amount of glycols brings moisturization, as well as Emulium® Dolcea MB which has demonstrated its moisturizing properties in a clinical test. Its light blue color is brought by Mala'Kîte™, a malachite stone extract. It also protects the skin against screen pollution thanks to EnergiNius®.
Key points
- Highly moisturizing
- Light texture
- Soft finish
Formule
Phase | Name | INCI | Supplier | % |
---|---|---|---|---|
A1 | DEMINERALIZED WATER | WATER | - | 54.35 |
BIO-PROPANEDIOL | PROPANEDIOL | Connect Chemicals | 15.00 | |
VANATURAL | BENTONITE | R.T. Vanderbilt | 2.00 | |
A2 | SATIAXANE CX91 | XANTHAN GUM | Cargill | 0.20 |
GLYCERIN | GLYCERIN | - | 12.00 | |
A3 | EMULIUM® DOLCEA MB | CETEARYL ALCOHOL, GLYCERYL STEARATE, JOJOBA ESTERS, HELIANTHUS ANNUUS (SUNFLOWER) SEED WAX, SODIUM STEAROYL GLUTAMATE, WATER, POLYGLYCERIN-3 | Gattefossé | 2.50 |
B | PRESERVATIVE | PRESERVATIVE | - | 0.70 |
CETIOL® ULTIMATE | UNDECANE, TRIDECANE | BASF | 10.00 | |
C | MALA´KITE™ | WATER, MALACHITE EXTRACT | Gattefossé | 2.00 |
ENERGINIUS® | FRUCTOSE, GLYCERIN, WATER, WITHANIA SOMNIFERA ROOT EXTRACT | Gattefossé | 1.00 | |
D | CITRIC ACID (10% SOL.) | WATER, CITRIC ACID | - | 0.25 |
100.00 |
Operating instruction
- Heat water and propanediol of A1 to 75°C then disperse bentonite under high shear for 15 min.
- Prepare premix A2 and add to A1 under moderate mixing.
- Add A3 to A1+A2 (it is not limpid, it is normal), let it melt at around 70°C.
- Mix A under high shear then cool.
- Prepare B and add it to A1+A2+A3 at 50°C under high shear for 5 min.
- Cool under moderate shear then under 40°C add C.
- Adjust pH with D.
Specifications
- Aspect: Light blue translucid serum
- pH = 6.1 ± 0.5
- Viscosity Brookfield RV (spindle A, speed 5): approx. 1640 mPa.s after 24h