Icy Eye Stick ⋅ Gattefossé

In a few words

Reduce puffiness by mechanical and biological action. This stick formula provides a fresh sensation thanks to the water contained inside. On its side, Eyeglorius™, an upcycled sea buckthorn leaves extract, helps to reduce dark circles and eye bags by regulating microcirculation and inflammation.

Tip: Increase the fresh sensation by storing the stick in the fridge!

Key points

Fresh sensation
Anti-fatigue eye care
Solid W/O Emulsion

Upon application

Formule

Phase	Name	INCI	Supplier	%
A	EMULIUM® ILLUSTRO	POLYGLYCERYL-6 POLYHYDROXYSTEARATE, POLYGLYCERYL-6 POLYRICINOLEATE, POLYGLYCERIN-6	GATTEFOSSE	4.00
	CETYL PALMITATE	CETYL PALMITATE	-	9.00
	LIPOCIRE™ A SG	C10-18 TRIGLYCERIDES	GATTEFOSSE	8.50
	HYDROGENATED CASTOR OIL	HYDROGENATED CASTOR OIL	-	1.50
	KAHLWAX 6607H	HYDROLYZED SUNFLOWER SEED WAX	KAHL	3.00
	KAHLWAX 6607L	HELIANTHUS ANNUUS (SUNFLOWER) SEED WAX, ASCORBYL PALMITATE, TOCOPHEROL	KAHL	6.00
	CETIOL® OE	DICAPRYLYL ETHER	BASF	4.00
	LABRAFAC™ CC MB	CAPRYLIC/CAPRIC TRIGLYCERIDE	GATTEFOSSE	9.00
	SENSIVA® SC 50	ETHYLHEXYLGLYCERIN	SCHULKE & MAYR	0.20
	BENTONE GEL® EUG V	OCTYLDODECANOL, DISTEARDIMONIUM HECTORITE, PROPYLENE CARBONATE	ELEMENTIS	5.50
B	DEMINERALIZED WATER	WATER	-	40.75
	MAGNESIUM SULFATE (99%)	MAGNESIUM SULFATE	-	1.50
	GLYCERIN	GLYCERIN	-	3.00
	EUXYL™ K 712	WATER, SODIUM BENZOATE, POTASSIUM SORBATE	SCHULKE & MAYR	1.00
	UNICERT® BLUE 05601-J (0.1% SOL.)	WATER, BLUE 1	SENSIENT	0.70
	CITRIC ACID (10% SOL.)	WATER, CITRIC ACID	-	0.10
C	EYEGLORIUS™	OCTYLDODECYL MYRISTATE, HIPPOPHAE RHAMNOIDES EXTRACT	GATTEFOSSE	2.00
C	PERFUME DEGIVRE MOI ITM0562182	PARFUM	DOMAINE D’ARGEVILLE	0.15
D	TIMIRON® ICE CRYSTAL	SYNTHETIC FLUORPHLOGOPITE, TITANIUM DIOXIDE, TIN OXIDE	MERCK	0.10
				100,0

Operating instruction

Prepare in the main vessel the oil phase A, heat at 80°C and disperse Bentone Gel® under medium to high shear. Control homogeneity of the phase.
Prepare water phase B and heat at 80°C.
Proceed with the emulsion of phase B into phase A at 80°C under rapid mixing, then maintain high shear (Rotor/Stator 3000 rpm) during 10 min.
Prepare phase C and add to phase A+B at 80°C. Mix until homogeneous.
Add phase D and mix under medium shear until everything is incorporated.
Cool down under medium shear and at 74°C+/-2°C pour directly into the bottom filled packaging or into the mold.